Electrical and Electronics Engineer Cv


Appearance & Classification

  • Move your photo a bit higher.
  • You don’t need to write “resume” at the beginning.
  • Move your name a bit lower and write your name and e-mail address below it.


  • You have written “summary” twice. Compile these.
  • Change the “skills” title as  “personal skills” or under the title of “skills” prepare a table with two columns and write your personal skills on one side and software skills on the other.
  • State the dates and durations of  all the projects you have carried out and work experiences you have.
  • Write “Educational Qualification” part under “skills” part.


There are some spelling mistakes, corrected and highlighted in your CV. Make sure that you capitalize the first letters of all proper names, and leave a space after the punctuations. (number: + 72 500 000 00 00)

We cannot be sure that we identify all the points that can better your CV, however if you benefit from this free service of ours, please share it with your friends.




Career Objective
I am seeking an exciting and challenging position within a dynamic and innovative organisation which offers variety and the opportunity for both business and personal growth.
My goal is to play a pivotal role in an organisation where I achieve results by making a measurable contribution through creative leadership, teamwork, passion enhanced by the drive to succeed.


Engineering in Electrical and Electronics (2007 – 2011).
Aggregated average of 72% when completed Engineering.
Working under Aqua Sub Engineering pvt ltd, Coimbatore.
Completed 6 months apprenticeship training at Kerala State Electricity Board (KSEB) 110 kV substation, paruthippara from July 2011 to February 2012.
Done implant training at Kerala State Electronics Development Corporation Ltd (KELTRON), Karakulam, Thiruvananthapuram.
Engineering project with L&T (Larsen and Toubro Ltd.) Coimbatore.
Project name: Regulated power supply with interlocking of solenoids.
Microcontroller based.
Self-motivated and consistently hardworking attitude.


Comprehensive problem solving abilities.
Excellent verbal and written communication skills.
Ability to deal with people diplomatically.
Willingness to learn team facilitator hard worker.

Software skills

Languages: Java
Operating system: Windows, DOS
Electronics Software: Mutisim, Psim, MP-Lab
Good knowledge of modeling with AutoCAD.


Title: Regulated power circuit with interlocking of solenoid.
Area: Micro controller based.
Company: Larsen and Toubro Ltd, Coimbatore.
Short Description: The project was completed in Larsen and Toubro Ltd at Coimbatore and we use an EOM, (Electrically Operated Machine) which includes smps, pic microcontroller, toggle switch and a solenoid arrangement for the purpose of distant operation of Moduled Case Circuit Breaker. This is suitable for factories, large scale industries etc.

Project Details:

Regulated power circuit with interlocking of solenoid is an automatic operator fitted on the MCCB (Moduled Case Circuit Breaker).
MCCB’s are generally used for industrial purpose where rating starts from 100Amps to 1600Amps.
Advancement in technology has introduced electronics in switchgear industry
This project focus on distinct operation of MCCB’s, and includes features like regulation, interlocking etc.
The main advantage of this project is interlocking and time control operation.
This project uses PIC micro controller for the interlocking and time control operation.
A Switched Mode Power Supply (SMPS) is used for the wide range adaptability of power supply.
This whole system can be used as an Electrically Operated Machine
230v AC supply is given to smps circuit. The smps convert this 230V AC to 9V DC. This 9V DC is again given towards another small regulating circuit where 9V DC converts to 5V DC.
This conversion is done because of that the pic 16F877 microcontroller which we programmed can withstand only up to 5V.Then the 5V power is forwarded towards the mosfet /toggle switch which is used to energize the coil inside the circuit breaker.
Thus MCCB’s can be able to operate from a distance. The interlocking operation of switches used is another great advantage for the industries.

Educational Qualification

B.Tech Anna University, Tirunelveli 2011 72%
Plus Two Board Of Kerala 2007 73%
SSLC Kerala board of Education 2005 73%

Job Profile

Six months experience in the Transmission & sub division field & One month experience at production field.
Working at Aqua Sub Engineering Pvt Ltd, Coimbatore

Carrier Features

Production of rotors & stators for different pumps & motors.
Core Competency

Rotor assembling
Solving issues related to rotor.
Balancing the rotor

Six months experience in the Transmission & sub division field.

Worked at Kerala State Electricity Board (KSEB) 110 kV substation, Paruthippara as apprentice trainee from July 2011 to February 2012.
Attended implant training at Kerala State Electronics Development Corporation ltd (KELTRON), Karakulam, Thiruvananthapuram for a period of 7 days.

Carrier Features

Assembling power transformers.
Maintaining electrical equipment’s at substation
Maintaining 110 kV yard
Core Competency

Wiring of transformers & control panel
Analysis of yard
Solving issues in maintenance related to transformers & other components of substation

Personal Profile

Full Name: ARUN V G
Date of Birth: 4th April 1989
Gender: Male
Marital Status: Single
Father’s Name: Vijayakumaran Nair L
Nationality: Indian
Permanent Address: KARTHIKA
NMC 31/118, Karainda
Kadavattaram, Neyyattinkara P.O
Thiruvananthapuram – Dist.
Kerala, India- 695121
Mobile: +919995214887,+919698711754
Languages Known: English, Hindi, Tamil & Malayalam.
College: Udaya School of Engineering, Vellamodi.
Branch: Electrical and Electronics Engineering.
Strengths: Confidence, Flexible
Hobbies: Traveling, Playing Badminton
Achievement’s: Member in Indian Society of Electrical and Electronics Engineers.


Observing myself for past years, I was able to keep the commitments I had given to my superiors as a fresher. I had good exposure as a team member and a team leader. I have done my projects in a challenging and competitive environment which will help me to work as a good team player and finish the assignments on time.


I hereby declare that the above-mentioned information about me is true to the best of my knowledge and belief.


( No ratings yet )
Like this post? Please share to your friends:
Leave a Reply

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.